AABCOOLING Thermal Grease 3 - 1g

Thermal paste for CPUs and graphics cards

AABCOOLING Thermal Grease 3 - 1g is a high-performance thermal paste with a thermal conductivity of 8.5 W/mK. It is electrically non-conductive, so there is no risk of a short circuit, even on very sensitive electronic components.

The paste precisely fills the micro-gaps between the processor and the heatsink base and ensures stable operation with no deterioration of thermal performance over time. For the best conductivity, apply it in a very thin layer.

Key features

• High thermal conductivity: 8.5 W/mK
• Electrically non-conductive – no risk of short circuits
• Optimal density and viscosity – spreads evenly when the heatsink is pressed down
• Thick consistency – does not dry out or run
• Stable conductivity with no deterioration over time
• Easy to apply and remove
• Wide operating temperature range: -200°C to +280°C

Applications

The paste is suitable for desktop PCs, laptops and other electronic devices. Apply it between the heatsink and:

• the processor (CPU),
• the graphics chip (GPU) of a graphics card,
• the chipset (northbridge and southbridge),
• the power delivery section and other heat-generating electronic components.

How to apply thermal paste

1. Remove any old paste residue with the included isopropyl alcohol wipe and wait a moment for it to evaporate.
2. Use the included spatula to apply a thin layer of paste to the processor surface and spread it evenly.
3. When mounting the heatsink, press it onto the processor and gently twist it left and right a few times so that the paste spreads evenly between the processor and the heatsink base.

Technical specifications

• Net weight: 1 g
• Thermal conductivity: 8.5 W/mK
• Operating temperature range: -200°C to +280°C
• Density: 3.73 g/cm³
• Viscosity: 85,000 cps
• Colour: grey
• Electrical conductivity: none – the paste is non-conductive

Package contents

• 1 × AABCOOLING Thermal Grease 3 - 1g
• 1 × isopropyl alcohol wipe (60 × 60 mm)
• 1 × spatula (80 mm long)