AABCOOLING MANTIS

Laptop cooling pad AABCOOLING MANTIS

The AABCOOLING MANTIS is a laptop cooling pad equipped with 2 fans (122 mm). The fans draw in air from below and direct it at the underside of the laptop, lowering the temperature of the casing and components. This keeps your laptop running stably even under heavy load – at work and while gaming.

Key features

• 2 fans (122 mm) with red LEDs – airflow up to 70 CFM
• Quiet hydraulic bearings – noise level from 16 dB(A)
• Stepless fan speed control with a rotary knob
• Side RGB lighting switched on and off with a button
• Additional USB port on the pad – e.g. for a mouse or a flash drive
• Tilt angle adjustable in 4 positions – a more comfortable position for typing and viewing the screen
• Fold-out front stop, 15 mm high, keeps the laptop from sliding off
• Metal mesh traps dust that would otherwise end up in the laptop's cooling system
• Flexible feet dampen vibrations and do not scratch the desk

Use and compatibility

The pad fits laptops with screen sizes from 10" to 16". It is Plug and Play – powered with 5 V from the laptop's USB port or a USB mains adapter, with no drivers required. Raising the laptop at an angle improves ergonomics: the screen sits higher and the keyboard is more comfortable to use. Dust can easily be removed from the pad with compressed air, e.g. AABCOOLING Compressed Gas Duster.

Connection and operation

1. Set the pad to the desired height and place your laptop on it.
2. Connect the USB cable to a USB port on your laptop or to a USB mains adapter.
3. Turn the controller knob clockwise to start the fans and set the desired speed. The knob is located at the back of the pad, next to the USB ports.
4. To switch the side RGB lighting on or off, hold the button next to the knob for 3 seconds.

Technical specifications

• Dimensions (W × D × H): 400 × 290 × 45 mm
• Height in tilt positions: 95 / 115 / 130 / 140 mm
• Material: ABS + metal mesh
• Weight: 830 g
• Fans: 2 × 122 × 122 × 15 mm
• Rotational speed: 1100–1300 RPM ±10%
• Airflow: 45–70 CFM
• Noise level: 16–24 dB(A)
• Bearings: hydraulic
• Front stop (W × H): 80 × 15 mm
• Power supply: 5 V DC from a USB 3.0/2.0/1.1 port or a USB mains adapter
• Power consumption: 5 V DC / 0.54–0.72 A / 2.7–3.6 W ±10%
• Data transfer: USB 2.0, up to 480 Mb/s
• USB cable length: 60 cm
• MTBF: 20 000 h
• Compatibility: laptops 10"–16"

Package contents

• 1 × AABCOOLING MANTIS
• 1 × USB power cable