AABCOOLING Quantum

Laptop cooling pad with 13 fans, RGB and phone holder

AABCOOLING Quantum is a laptop cooling pad for gamers and anyone who works intensively on a laptop. Thirteen fans (3 × 80 mm and 10 × 60 mm) draw in cool air from below and direct it to the hot underside of the laptop. As a result, the laptop runs more stably and its own fan does not have to spin up as much.

The pad features side RGB lighting, speed control, nine-step tilt adjustment and a clip-on phone holder – your smartphone always stays in sight while you work.

Key features

• 13 fans: 3 × 80 mm and 10 × 60 mm
• Airflow up to 130 CFM
• Hydraulic bearings, noise level 15–25 dB(A)
• Front control panel: POWER button and speed control with the “+” and “–” buttons
• Side RGB lighting with a separate button
• Nine-step tilt adjustment
• Two fold-out front stoppers, 15 mm high, that keep the laptop from sliding off
• Metal mesh that traps dust before it reaches the laptop
• Flexible feet that dampen vibrations and protect the desk from scratches
• Additional USB port – connecting the pad does not use up a port on your laptop
• Clip-on phone holder

Use and compatibility

The pad fits laptops with a screen size of 10"–17.3". It is suitable for the desk, travel and university, and thanks to its contoured underside it can also be used with the laptop on your lap.

When gaming or under heavy load, set the maximum speed, while the tilt adjustment lets you match the screen height and keyboard angle to your posture.

Setup and operation

1. Place the pad on a flat surface, set the tilt angle and fold out the front stoppers.
2. Put the laptop on the pad; attach the phone holder if needed.
3. Connect the USB cable to a USB port on the laptop or to a 5 V USB mains adapter – no drivers are required.
4. Press the red POWER button to start the fans and set the speed with the “+” and “–” buttons.
5. The blue button with the sun icon controls the RGB lighting; holding it for 3 seconds switches the side lighting on or off.
6. Dust collected on the mesh can be removed with compressed air, e.g. AABCOOLING Gas Duster.

Technical data

• Model code: NCO100
• Dimensions: 410 × 296 × 25 mm
• Height in the individual tilt positions: 25 / 72 / 95 / 112 / 124 / 134 / 142 / 150 / 156 mm
• Dimensions with phone holder: 546 × 297 × 30 mm
• Phone holder dimensions: 145 × 18 × 18 mm
• Material: ABS + metal mesh
• Weight: 1300 g
• Fans: 3 × 80 mm, 10 × 60 mm
• Fan speed: 80 mm: 1400–1800 rpm ±10%, 60 mm: 1500–1900 rpm ±10%
• Airflow: 130 CFM
• Noise level: 15–25 dB(A)
• Bearings: hydraulic
• Fan lifetime: 20,000 h
• Power supply: 5 V DC from a USB 3.0/2.0/1.1 port or USB mains adapter
• Power consumption: 0.8 A / 4 W ±10%
• Port: USB 2.0 (up to 480 Mb/s), Plug and Play
• Tilt adjustment: 9 positions
• Front stoppers: 2 × 31 × 15 mm
• Lighting: side RGB, switched on and off with a button
• USB cable length: 70 cm

Package contents

• 1 × AABCOOLING Quantum laptop cooling pad
• 1 × clip-on phone holder
• 1 × USB power cable