Home&Office Compressed Gas Duster 750ml

AABCOOLING Home&Office compressed air duster 750 ml – what is it?

AABCOOLING Home&Office Compressed Gas Duster 750 ml is compressed gas in a can. Its powerful high-pressure jet removes dust, crumbs, liquid droplets and other loosely adhering dirt – even from hard-to-reach places. The gas is an eco-friendly, biodegradable propane-butane mixture – freon-free and odourless. Ideal for the home, office and workshop.

15 cm straw – precision where you need it

The thin, flexible 15 cm application straw lets you reach the smallest gaps and clean a part up close while holding it in your hand. You can trim the straw with scissors to the length you need. Two interchangeable nozzles make the work comfortable and precise.

For computers, laptops and office equipment

Compressed air is a proven way to clean the delicate components of computers and laptops. Use it to remove dust from keyboards, printers, photocopiers and fax machines, as well as spilled toner inside a printer. High gas pressure ensures effective cleaning.

Phones, cameras and small electronics

A dirty phone speaker or dust in the charging port can disrupt how your device works – compressed gas cleans them in no time. It is also suitable for cleaning a camera sensor. You can blow dust, dirt or water droplets out of watches, sewing machines, hair dryers, cash registers and other precision devices.

For DIY enthusiasts and the workshop

Dusty tools, furniture panels or hinges? Point the straw at the spot, press the nozzle and blow the dust away.

One product – many uses

AABCOOLING compressed gas removes dust and loose dirt from computer equipment, consumer electronics, household appliances and many other devices. No need to buy several different products – one can serves you at home, in the office and in the workshop.

How to use the compressed air duster

1. Disconnect the device from the power supply before cleaning.
2. Wait 30 seconds for the voltage on electronic components to discharge (hold down the power button).
3. Do not shake the can immediately before use.
4. Push the application straw into the selected nozzle.
5. Hold the can upright, nozzle up – do not tilt it more than 60°.
6. Point the straw at the part from a distance of 5–10 cm and press the nozzle in short bursts. Done!

Held upside down, the can works as a freeze spray: when tilted more than 60° or held nozzle down, the product cools down to -50°C. For freezing, use the can in the inverted position.

Important safety information

Before use, read the safety data sheet and the product label and follow these precautions:

• The product contains a mixture of flammable gases (propane, butane, isobutane) – use it with care.
• Ensure good ventilation while using the product.
• Parts being cleaned must always be disconnected from the power supply.
• Avoid contact with skin – risk of frostbite.
• Wear protective gloves and safety glasses.
• Extremely flammable. Keep away from open flames and glowing embers.
• Do not expose to direct sunlight.
• Do not store at temperatures above 50°C.