AABCOOLING Home&Office Compressed Gas Duster 400ml

Compressed air duster for computers, offices and workshops

AABCOOLING Home&Office Compressed Gas Duster 400 ml is compressed gas in a can. Its powerful high-pressure jet removes dust, dirt, liquid droplets and other loosely adhering contamination – even from hard-to-reach places. An eco-friendly, biodegradable gas mixture (propane-butane) – CFC-free and odourless. Ideal for home, office and workshop use.

Precise cleaning with the 15 cm tube

Simply push the 15 cm applicator tube into the nozzle. It lets you clean components up close while holding them in your hand, and it works just as well for general cleaning. The tube can be cut to a shorter length with scissors.

Keep your computer, laptop and office equipment clean

AABCOOLING compressed air is a great way to clean delicate and sensitive computer and laptop components. Use it to remove dust from keyboards, photocopiers, printers and fax machines, as well as spilled toner inside a printer. The high gas pressure ensures effective cleaning.

Phones, cameras and precision equipment

A dirty phone speaker or dust in the charging port can affect how your device works. A few bursts of compressed gas clear them in no time – just like the sensor of a digital camera.

The product also removes dust, dirt and water droplets from hair dryers, sewing machines, watches, photographic equipment, cash registers and other precision mechanical devices.

For DIY and the workshop

Dusty workshop tools, furniture panels or hinges? Point the tube at the part, press the nozzle and blow the dust away. The thin tube reaches even the smallest nooks and crannies.

Also works as a freeze spray down to -50°C

When you tilt the can by more than 60° or turn it upside down, the product works as a freeze spray down to -50°C.

One product – many uses

Thanks to its wide range of uses, you don't need to buy several different products. One can of AABCOOLING compressed air covers your needs at home, in the office and in the workshop.

How to use the compressed air duster

1. Disconnect the device to be cleaned from the power supply.
2. Wait 30 seconds for the voltage in the electronic components to discharge (hold down the power button).
3. Do not shake the can immediately before use.
4. Push the applicator tube into the nozzle and point it at the part from a distance of 5–10 cm.
5. Hold the can upright – do not tilt it by more than 60° while cleaning.
6. Press the nozzle in short bursts. Done!

Important safety information

• Read the product label and the safety data sheet before use.
• The product contains a mixture of flammable gases (propane, butane, isobutane) – use it with care.
• Ensure adequate ventilation while using the product.
• The parts being cleaned must be disconnected from the power supply.
• Avoid contact with skin – risk of frostbite.
• Wear protective gloves and safety glasses.
• Extremely flammable. Keep away from open flames and embers.
• Do not expose to direct sunlight.
• Do not store at temperatures above 50°C.