138 x 97,5 x 75 mm
up to 100W TDP
92 x 92 x 25 mm
12 VDC/ 0,16A
4 Pin PWM 3 Pin Compatible (no auto speed control)
800 ~1800 RPM +/- 10%
13,3 ~ 42,2 CFM
12 - 21 dB(A)
FDB(Fluid Dynamic Bearing) - Hydraulic
AAB Cooling Super Silent P1 PWM Rev.2 is the optimal and cheap cooling designed to replace the inefficient cooling provided with the processor. P1 Rev.2 has two 6mm thick heatpipes. The heat sink base was made with HDT technology (Heatpipe Direct Touch).
The HDT technology used increases cooling performance. Heat pipes contact the processor surface directly (no additional barrier to slow down the heat transfer from the processor to the high quality aluminum fins), the large aluminum base further disperses the processor generated temperature. The heatsink consists of 37 aluminum fins. An additional advantage is the roughness and suitably specific bending of the aluminum blades at the air outlet, which contributes to much faster radiation and the discharge of stored heat.
The 92mm adjustable fan with adjustable PWM (automatic fan speed control from the motherboard bios) optimizes workflow and ensures decent work performance - fan mounted on anti-vibration pins.
- 2 x HeatPipe - increased performance
- Quiet operation min. 12 dB
- Base made in HDT technology
- Modern, quiet FDB bearing
- Easy to install Push Pin
- Compatibility Intel, AMD
Low-speed 92mm fan with PWM support, which through bios allows to adjust the fan speed to CPU temperature. Reduces noise to a minimum.
4 HEAT PIPE HEADS (TWO on each side) are capable of receiving up to 100Watt of power generated by the processor.
Easy to install:
Fans can be mounted in seconds without any tools
The use of FDB bearings ensures extended fan lifespan.
Intensity of sound:
Decent working performance - fan mounted on anti-vibration pins.
- 1 x AAB Cooling Super Silent P1 PWM Rev.2
- 1 x PushPin mount for LGA 775/1150/1151/1155/1156/1366
- 1 x Mounting clip for AMD platform
- 1 x Thermal compound AAB Cooling Thermal Grease 2 - 1g