Total dimensions: | 380 x 295 x 35 mm |
Size with adjustment: | 380 x 295 x 35-90-120-135-145-152 mm (width x length x thickness) |
Material: | Plastic + aluminum Grid |
Weight: | 1050 g |
Plug & Play Version: | just plug it to make it work |
Data Transmission: | USB 2.0 & 1.1 ports to 480 Mbps |
Power Supply: | USB 3.0 / 2.0 / 1.1 / 1.0, 5V DC or USB-AC adapter |
Power consumption: | 5V DC / 0,4A~0,9A / 2W~4,5W |
Fans dimension: | 1 x 120x120x25 mm ,
4 x: 70x70x15 mm |
Number of fans: | 5x BLUE LED |
Fan spped: | 120mm: 0~1000 rpm ± 10% ,
70mm: 0~2000 rpm ± 10% |
Airflow: | 124 CFM |
Noise: | level of 11dB(A) |
Adjustment of inclination: | 5-step tilt adjustment |
Size of two front blocks (bookends): | 40 x 20 mm |
Power cord length: | 60 cm |
Bearings: | Hydraulic |
Lifespan: | 50000 h |

AABCOOLING NC71 Black Laptop stand is yet another AABCOOLING stand, which has five fans! Perfect for very large notebooks that need a strong and solid cooling base. One 120mm fan and four 70mm fans are suitable for efficient cooling. Weight of 1050g provides a stable base for a laptop, and a rotary potentiometer enables simultaneous adjustment of all fans (1x 120mm and 4x 70mm). Aesthetically pleasing, efficient and quiet notebook stand, produces a minimum noise of only 11dB(A). Hydraulic bearings work very quietly. When setting the lowest fan speeds, noise is practically inaudible (SUPER SILENT mode). The lower part of the base has a 5-step tilt adjustment to ensure the highest ergonomics.
- Stable and efficient construction
- very efficient Blue LED 11dB(A)
- Ideally profiled angle inclination
- Five-step tilt adjustment
- Anti-vibration pads underneath
- Built-in fan speed regulator
- Excellent cooling and stable laptop performance
- 2 x USB 2.0, OFF / ON switch
The use of the AABCOOLING NC71 helps keep your laptop cool, protects it from overheating, and prevents from experiencing several problems: performance drop and a noticeable slowdown in performance, battery life and processor crashes.
Main advantages:
- Stable design with fans 125mm, 70mm
- Switch with potentiometer + manual adjustment of fans.
- Airflow: The fans direct the cool air, which is below the stand, to the entire notebook casing. This reduces the case temperature as well as the processor core
- Large heat dissipation
- Easy to install
- 2 x USB connector - works without additional drivers
- Additional risers eliminate vibration and resonance and do not scratch the desk / desk surface
- Additional rear handle allows you to increase the angle of the stand up to five different ranges
- Blocker to prevent slipping your laptop at an angle
Application:
- Compatible with all notebooks / laptops of different matrix sizes. The size of the laptop does not matter here if the difference is within a few centimeters, but the sensitive areas where the elements are potentially exposed to damage due to excessive temperature
- Recommended compatibility: notebooks from 15,6" ~ 18,4". Please refer to the dimensions of the stand.
Included:
- 1 x AABCOOLING NC71
- 1 x USB Cable
- 1 x Package